Novotechnik LWH-0375 Potentiometric Linear Position Transducer Collector Track

Description

Novotechnik Potentiometric Linear Position Transducer
Features
Position transducers with resistive and collector track made from conductice plastic for direct, accurate measurement of travel in display- or feedback applications.
High resolution (0.01 mm) combined with a stroke length of up to 900 mm permits the accurate measurement of linear displacement.
Rack and pinions or similar devices are not required because the design of the transducers is such that they may be built directly into the mechanical system.
Tighter tolerances on the extruded body combined with a special surface treatment permit high operating speeds and reduced wear. A pivoting front bearing over comes "stickslip" type of operation even
Special features
• long life up to 100 Mio. movements, depending on application
• outstanding linearity up to ±0.04 %
• high resolution 0.01 mm
• very high operating speed
• connection via plug and socket to DIN 43 650 (hydraulic connector)
• protection class IP 55
Description
Housing:  aluminium, anodized
Fixings:  adjustable clamps, snap in on all sides
Actuator:  stainless steel (1.4305), rotatable, exernal thread M6
Bearings:  pendular fixed slide bearing
Resistance element:  conductive plastic
Wiper assembly:  precious metal multi-finger wiper, elastomer-damped
Electrical connections:  4-pin plug socket to DIN 43650
Environmental Data
Temperature range:  -30... +100 °C
Vibration:  5... 2000 Hz
Amax = 0.75 mm
amax = 20 g
Shock: 50 g  11 ms
Life:  >100 x 106 movements
Operating speed:  10 m/s max.
Operational acceleration:  200 (20 g) m/s2 max.
Protection class:  IP55 (DIN EN 60529)
Package
1PC